|
Home
|
Recording Studio - Recording Options
|
When you Click on the Options Button a drop down will show another Button for Video/Audio Settings. Click on this button
to change the Video and Audio Settings.
After Click on the Video/Audio Settings Button the following screen will appear.
To chose the camera you want to use, under Video Settings, click on the down arrow and highlight the camera. (Note: The following
screens may appear different depending on the camera installed on your computer, but the information and settings will be the same)
To preview the video before recording, Click the Preview Button as indicated on the screen below.
After Clicking the Preview Button the video will start playing in the Preview Window. At this time you can choose the format
button or quality button to change different settings on the Video.
If you want to change the Output size, i.e., the size the video is displayed at, the frame rate at which the video is served or the Compression,
Click on the Format Button. The following screen will appear.
Clicking on the Quality Button allows you to change the Settings for Exposure, Brightness, Contrast, etc. To return the
settings to the Original Default Position, Click on the Restore Default Button.
Checking on the Test Button allows testing of the Microphone. A new window opens indicating the level of the signal. To
change Microphones Click on the down arrow.
To Change the Speakers, Click on the down arrow.
Under the Advanced Settings Button you can change the Banding Filter. Choose either 50 Hz or 60 Hz.
Under the Edit Menu there is a feature to Trim the Video at the Beginning or End. As an example, at the beginning of the Video
you are adjusting the camera for focus, you would move the slide bar to the position you want to Trim and click on the Trim Beginning
Button. This will remove the unwanted part. To trim the end of the Video you would move the slide bar to the end of the video and then
move it to the left until you reached the end of the part you wanted to trim, then Click on Trim End.
|
|
|
Also See:
Getting Started
Recording a Video
Saving a Video
|
|
|
